Mushroom Tray Table with Raised Rim, Gill Band and 2 Side Cap Shelves, Handcrafted Solid Wood Round Accent Table for Living Room, Bedroom, Entryway

Take a mushroom cap, scale it to table height, carve the gill pattern into the outer band, raise the rim so nothing rolls off the edge, and add two smaller mushroom shelves on the trunk below. That is this table.

The round tabletop has a raised lip running all the way around the perimeter. The lip turns the surface into a contained tray where a coffee cup, a candle, keys, or a stack of coasters stay put without sliding toward the edge. In the center of the top, a short rounded knob rises from the surface, replicating the attachment point where a real mushroom cap meets its stem. Around the outside of the tabletop, between the flat surface and the underside, a deep gill band wraps the entire circumference. The gill lines are carved vertically into the wood in tight, even rows. From the side, the gill band is the first thing you notice. The shadow between each carved line changes throughout the day as the light angle shifts.

Below the tabletop, the trunk is a thick, solid column with natural grain movement, knots, and fine surface cracks left visible. Two small mushroom cap shelves grow from the trunk at staggered heights on the same side. Each small cap has its own short stem connecting it to the trunk and a smooth flat top for a drink, a phone, a small plant, or a coaster. The small caps add side storage at arm-reach height without increasing the table footprint.

Our Vietnamese artisans carve this entire piece from solid wood. The tray top, the gill band, the central knob, the trunk, and both side caps are all one continuous piece of hardwood. The warm golden tone and swirling grain patterns come from the wood itself.

?? Preview Your Design Before Production
We send photos and videos at every stage. You approve before we ship.

Tray-style tabletop with raised rim

The raised lip is carved from the same block as the rest of the top. It adds roughly half an inch of height around the entire perimeter, enough to catch a rolling pen or contain a small spill. The inner tray surface is flat and smooth for everyday use.

Full-circumference gill band

The carved gill band runs unbroken around the outside of the tabletop. Each vertical groove is cut individually from top to bottom of the band. On a 24-inch top, the band contains over 150 carved lines. This is the most time-consuming element of the piece and the detail that draws the most attention in person.

Solid trunk pedestal

The trunk shows natural character marks: fine checks, mineral streaks, and grain shifts that developed over decades of growth. The base sits flat on the floor. No legs, no hardware, just the solid wood column supporting the full weight of the tray top.

Custom sizing available

Tabletop diameter, table height, rim height, gill band depth, side cap count (0 to 3), wood species, and finish tone are all adjustable to your needs. Contact our customer support team with your specifications and we will build the right table for your space.

Furniture Placement

• Position your furniture away from direct sunlight, or use blinds or curtains to reduce sun exposure.
• Always set your furniture on a level surface to preserve its balance and structure.

Cleaning & Upkeep

• Regularly wipe down your furniture with a soft, dry, or slightly damp cloth.
• Avoid using harsh chemicals like bleach or ammonia, as these can ruin the finish and damage the wood.

Weight Capacity & Use

• Respect the recommended weight limit for each piece to ensure its durability.
• When moving furniture, lift it instead of dragging or pushing to prevent surface scratches or joint damage.

Preventing Mold & Mildew

• Quickly wipe up any spills to stop moisture from penetrating the wood.
• In areas with high humidity, use a dehumidifier to maintain an ideal moisture balance.

Shipping Cost

We offer free shipping on all orders.

Return Policy

You can return your item within 30 days of the delivery date.

Products must be damaged or broken, in their original condition, and have all tags still attached.

Please Note: Returns are only accepted for items with manufacturer defects or those damaged during shipping.

Step 1: Share Your Specs

Tell us your dimensions, design ideas, materials, and color preferences.

Step 2: We Craft Your Piece

Our team starts production. Typical build time: 7–10 business days (varies by complexity).

Step 3: First Look

We send photos and videos for your initial review.

Step 4: Fine-Tuning

We make adjustments based on your feedback to match your vision.

Step 5: Final Approval

You get final photos/videos to confirm everything is perfect.

Step 6: Pack & Ship

We pack securely and ship your order. Typical delivery: 3–7 business days (depends on destination).