Mushroom Tall Cabinet with Carved Mushroom Top Sculpture and Mushroom Door Handles, Handcrafted Solid Wood Armoire, Minimalist Storage Wardrobe for Bedroom and Living Room

A solid wood armoire with two hand-carved mushrooms standing on top.

Two doors, two mushroom handles, two mushroom sculptures on the crown. The cabinet body is clean and minimal, with every vertical edge rounded smooth instead of squared off. The wood grain runs vertically on both doors and side panels, with natural knots visible in the surface. No carving on the body itself. The only sculptural detail is where it counts: the mushroom handles at door height and the pair of carved mushrooms rising from the top.

The Top Mushrooms

Two hand-carved mushroom sculptures grow from the center of the top surface. The left one is shorter with a compact cap. The right one stands taller with a wider cap and a longer curved stem. Both stems curve organically upward rather than standing straight. The caps have smooth rounded tops and carved gill lines underneath. They are fixed directly to the top panel and carved from the same wood species as the cabinet body.

The Doors and Handles

Two full-height doors meet at a center seam. Each door has one small mushroom-shaped pull handle positioned at mid-height near the center line. The handles are smaller and squatter than the top sculptures, sized to fit comfortably in your hand. Hinges are fully concealed, so the front face shows nothing but wood and the two mushroom pulls.

Interior

The full-height interior opens to a single tall compartment. Depending on your needs, it can be configured with a hanging rod for clothing, adjustable shelves for folded items and linens, or left open for larger storage. Contact us during ordering to specify your preferred internal layout.

Rounded Edges

All four vertical corners of the cabinet body are heavily rounded. The rounding is wide enough that you can run your hand along any edge without hitting a sharp angle. This applies to the top edges, bottom edges, and every vertical corner of the frame. The result is a softer profile that looks less like a standard box and more like furniture someone actually shaped by hand.

Base

A raised plinth base with a slight reveal between the cabinet body and the floor. The plinth keeps the wood off direct contact with the ground and adds a finished look to the bottom edge. Stable on flat surfaces without wall anchoring, though anchoring hardware is included for safety.

Wood and Finish

Honey-amber solid wood throughout with visible grain and natural knots. Hand-applied oil finish protects the surface and brings out the warmth of the wood without adding a glossy coat. The body, doors, handles, and top mushrooms are all carved from the same wood. Zero MDF, zero veneer, zero composite material anywhere in the piece.

Preview Before Shipping

We photograph and video your piece at every production stage. You approve the grain, mushroom carvings, and finish before we pack. You see exactly what you get before it ships.

Custom Options

Cabinet height, width, depth, internal configuration, mushroom style, wood species, and finish tone are all adjustable. Contact the Ashdeco team with your space requirements.

Furniture Placement

• Position your furniture away from direct sunlight, or use blinds or curtains to reduce sun exposure.
• Always set your furniture on a level surface to preserve its balance and structure.

Cleaning & Upkeep

• Regularly wipe down your furniture with a soft, dry, or slightly damp cloth.
• Avoid using harsh chemicals like bleach or ammonia, as these can ruin the finish and damage the wood.

Weight Capacity & Use

• Respect the recommended weight limit for each piece to ensure its durability.
• When moving furniture, lift it instead of dragging or pushing to prevent surface scratches or joint damage.

Preventing Mold & Mildew

• Quickly wipe up any spills to stop moisture from penetrating the wood.
• In areas with high humidity, use a dehumidifier to maintain an ideal moisture balance.

Shipping Cost

We offer free shipping on all orders.

Return Policy

You can return your item within 30 days of the delivery date.

Products must be damaged or broken, in their original condition, and have all tags still attached.

Please Note: Returns are only accepted for items with manufacturer defects or those damaged during shipping.

Step 1: Share Your Specs

Tell us your dimensions, design ideas, materials, and color preferences.

Step 2: We Craft Your Piece

Our team starts production. Typical build time: 7–10 business days (varies by complexity).

Step 3: First Look

We send photos and videos for your initial review.

Step 4: Fine-Tuning

We make adjustments based on your feedback to match your vision.

Step 5: Final Approval

You get final photos/videos to confirm everything is perfect.

Step 6: Pack & Ship

We pack securely and ship your order. Typical delivery: 3–7 business days (depends on destination).