Translucent Mushroom Floor Lamp with Glowing Cap and Gill Detail

The cap glows. Not just underneath where the gill lines fan warm light outward, but through the wood itself. The entire dome lights up from within, turning the grain into a map of golden rivers and dark contour lines visible from across the room. The cap is turned thin enough for light to pass through the wood, transforming solid timber into a warm, amber lantern. Below, a two-tone live-edge log stem rises from a dark walnut disc, its pale heartwood and dark sapwood wrapping around knot holes that look like eyes watching the room.

Translucent Wood Cap

The cap is the centerpiece. It is turned from a single piece of carefully selected wood, thinned across its entire surface to 4-6mm. At this thickness, warm LED light passes through the grain, revealing the internal structure of the wood in glowing amber, golden, and honey tones. Cathedral grain arcs appear as flowing dark lines against a bright amber field. Knots glow with darker halos. The cap's rim is left slightly thicker for structural strength and to hold the hand-carved gill lines underneath. The gill carving adds a secondary ring of warm, directional light that fans outward and downward from the rim, complementing the diffused glow from the cap surface above.
Turning a cap this thin at this diameter is the most demanding woodworking challenge in the mushroom lamp collection. The wood must be defect-free, kiln-dried to exact moisture content, and turned slowly to avoid cracking. The rejection rate is high. Every finished cap is a piece that survived the lathe.

Two-Tone Live-Edge Log Stem

The stem is a natural log section with the live edge preserved, showing the transition between pale heartwood in the center and darker sapwood near the outer surface. The two tones wrap around the stem in organic patterns, with dark sapwood waves and pale heartwood sections shifting as you walk around the lamp. Knot holes and branch scars are left open and sealed, adding depth and character to the surface. The log is cleaned, kiln-dried, and finished with natural oil that deepens both tones.

Dark Walnut Disc Base

The base is a thick, turned disc of dark walnut that anchors the lamp and contrasts with the pale and golden tones above. The walnut grain shows flowing chocolate-brown lines with lighter streaks. The dark base grounds the lamp visually, preventing the lighter cap and stem from feeling weightless. A felt pad protects the floor.

Specifications

• Material: Solid wood, thinned for translucency (cap) + live-edge log (stem) + solid walnut (base)
  
• Light: Built-in LED array inside cap, warm white (2700K), dimmable
  
• Power: Braided cloth cord with foot dimmer
  
• Cap: Translucent thinned wood (4-6mm) + hand-carved gill detail at rim
  
• Stem: Two-tone live-edge log with knot holes, kiln-dried
  
• Base: Dark walnut turned disc, weighted, felt pad
  
• Finish: Natural oil throughout, non-toxic

Placement

Built for a living room beside an armchair or sofa, a master bedroom reading corner, a home library, or a large open-plan space where the glowing cap can be seen from multiple angles. The translucent cap creates a warm, room-filling ambient light when fully bright and a soft golden night glow at the lowest dimmer setting. Place near a window for daytime shelf display and evening lantern effect.
Care
Wipe the cap gently with a soft dry cloth. Reapply wood oil once a year using a light hand on the thinned cap. Dust the log stem with a dry brush. The translucent cap is structurally sealed but should be handled with care during cleaning. LED components need no maintenance. Avoid excessive moisture and direct sunlight, which may shift the wood tone over time.
Handcrafted by Vietnamese artisans. The translucent cap is turned on a lathe from a single selected piece of wood, thinned by hand to allow light transmission. The live-edge stem is selected for its two-tone contrast. Every gill line is carved individually. No molds. No CNC machines. No two lamps will ever look the same.
Need a different size? Contact our team to discuss custom height, cap width, wood species, or finish preferences.
?? Preview your design before production
?? Free shipping
?? 30-day satisfaction guarantee

Furniture Placement

• Position your furniture away from direct sunlight, or use blinds or curtains to reduce sun exposure.
• Always set your furniture on a level surface to preserve its balance and structure.

Cleaning & Upkeep

• Regularly wipe down your furniture with a soft, dry, or slightly damp cloth.
• Avoid using harsh chemicals like bleach or ammonia, as these can ruin the finish and damage the wood.

Weight Capacity & Use

• Respect the recommended weight limit for each piece to ensure its durability.
• When moving furniture, lift it instead of dragging or pushing to prevent surface scratches or joint damage.

Preventing Mold & Mildew

• Quickly wipe up any spills to stop moisture from penetrating the wood.
• In areas with high humidity, use a dehumidifier to maintain an ideal moisture balance.

Shipping Cost

We offer free shipping on all orders.

Return Policy

You can return your item within 30 days of the delivery date.

Products must be damaged or broken, in their original condition, and have all tags still attached.

Please Note: Returns are only accepted for items with manufacturer defects or those damaged during shipping.

Step 1: Share Your Specs

Tell us your dimensions, design ideas, materials, and color preferences.

Step 2: We Craft Your Piece

Our team starts production. Typical build time: 7–10 business days (varies by complexity).

Step 3: First Look

We send photos and videos for your initial review.

Step 4: Fine-Tuning

We make adjustments based on your feedback to match your vision.

Step 5: Final Approval

You get final photos/videos to confirm everything is perfect.

Step 6: Pack & Ship

We pack securely and ship your order. Typical delivery: 3–7 business days (depends on destination).